The efficient removal of congo red and ciprofloxacin by peony seeds shell activated carbon with ultra-high specific surface area.

Preparation of high-performance activated carbon from agroforestry waste biomass can effectively improve the shortcomings of traditional biomass carbon performance. Using the waste biomass peony seeds shell (PSS) as the precursors in this study, high performance activated carbon was prepared by the KOH two-step activation method and used to remove congo red (CR) and ciprofloxacin (CIP) in water pollution. The obtained PSS-based activated carbons (PSACs) were characterized by SEM, EDS, N2 adsorption-desorption isotherm, FTIR, and XRD methods. The results showed that the activated carbon at 700 °C (PSAC-700) had an ultra-high specific surface area (2980.96 m2/g), excellent micropore volume (1.12 cm3/g), and abundant surface functional groups. The results of adsorption performance revealed that PSAC-700 exhibited excellent adsorption capacity for CR (qmax = 2003.2 mg/g) and CIP (qmax = 782.3 mg/g), which was superior to the carbon-based adsorbents reported reviously in the literature. Langmuir model could well describe the adsorption process of PSACs for CR and CIP, indicating that the pollutant molecules were uniformly adsorbed on the surface monolayer. The regeneration experiment suggested that after three cycles, the adsorption capacities of PSAC-700 for CR and CIP reached 1814 mg/g and 697 mg/g, respectively, with good repeatability. The preparation of PSAC-700 in this study has high adsorption capacity and strong application, which is an ideal material for wastewater purification adsorbent and has broad application prospect.

Ultrasonic-assisted extraction, fatty acids identification of the seeds oil and isolation of chemical constituent from oil residue of Belamcanda chinensis.

Belamcanda chinensis is a common garden herb. The extraction technology of B. chinensis seed oil (BSO) was optimized by ultrasonic-assisted extraction (UAE) method, the composition, relative content of main fatty acids and physicochemical properties of BSO were determined, and the isolation, identification and determination of chemical constituent in BSO residue (BSOR) were also investigated. The optimum process conditions of BSO by UAE were optimized as ultrasound time 14 min, extraction temperature 42℃, the ultrasound power 413 W and the liquid-solid ratio 27:1 mL/g. Under this condition, the extraction yield was 22.32 % with the high contents of linoleic acid and oleic acid in BSO. Ten compounds were isolated and identified from BSOR, and belamcandaoid P (9) was a new compound. The contents of the determined compounds were all at high level in B. chinensis seed. The study provided a certain scientific reference for the comprehensive development and utilization of B. chinensis seeds.